iii Index AUTHOR Javier Jaramillo-Colpas, 177 A Adi R.A.Abdullah, 681 Mohammad Bagus Adityawan, 600 Pingkan Mayestika Afgatiani, 98 Alexander Agung, 22 Elis Agustiana, 225 Ku Zarina Ku Ahmad, 31 Azaria Haykal Ahmad, 613 Amir Abu_Al_Aish, 300 Idrus Muhammad Alatas, 647 Dhuha Albusalih, 639 Khairul Anam, 587 Zakie Anugia, 212 Dayu Apoji, 275 Mochamad Apri, 402 Muhammad Aulia Arsal, 167 Siti Zubaidah Mohd Asri, 31 Mochamad Asrofi, 143 Alaa Abdulhasan Atiyah, 639 Sarah Iftin Atsani, 513 Thant Sin Aung, 120 Cries Avian, 587 Dion Awfa, 313 Noerma J. Azhari, 131 Muhammad Mufti Azis, 261 Fina Nur Azizah, 200 B Tibermacine Badreddine, 60 Khairayu Badron, 40 B.H. Abu Bakar, 569 María Cely-Bautista, 177 Arif Budiarto, 538 Alexander Wicaksono Budiarto, 647 Anatta Wahyu Budiman, 548 C Ana Nurganah Chaidar, 600 Chia-Hsin Cheng, 373 D Prihadi Setyo Darmanto, 613 Martin Darmasetiawan, 313 Mahros Darsin, 143 Zefanya Alovy P. Denindya, 167 Tita Kartika Dewi, 275 Markus Diantoro, 200 Achmad Teguh Djayadisastra, 91 Nguyen Huy Duong, 466 Endah Retno Dyartanti, 548 E Rahmi Elzufiah, 681 F Arriel Fadhilah, 167 Auni Diyana Fadzil, 31 Amalina Farhi Ahmad Fadzlah, 52 Maudy Anisa Fanani, 647 Ida Farida, 393 Mohammad Anwar Fathoni, 647 G Abbas Ghasemi, 324 H Nguyen Duc Ha, 466 Yunendar Aryo Handoko, 189 Faruq S. Hanggara, 587 Irsyad Nashirul Haq, 109 Riyanto Haribowo, 167 Hartatiek, 200 Andang Widi Harto, 22 Mohammad Kamrul Hasan, 40 Farisah Inarah Rahmat Hasby, 453 Wahidah Hashim, 40 Herianto, 513 Muhammad Kusumawan Herliansyah, 434 iv Tzu-Huan Huang, 373 Yung-Fa Huang, 373 Ismail Humolungo, 681 Muhammad Arfin Hussein, 98 I Muhammad Idris, 212 Muhamad Wahyu Iqbal, 289 Masyhur Irsyam, 647 Mohd Rizal Mohd Isa, 52 Reza Fauzi Iskandar, 109 Bambang Iskandriawan, 12 Ahmad Fadzil Ismail, 40 Harun Ismail, 587 Istiarto, 212 J Wardatul Jannah, 143 Abbas F. Jasim, 577 Fanghui Jia, 384 Zhengyi Jiang, 384 Reynaldo Jonatan, 419 Firman Bagja Juangsa, 613 Endang Juliastuti, 659 Arif Jumari, 548 K Grandprix T. M. Kadja, 131 Edwan Kardena, 79 Rendy Dwi Kartiko, 647 Aisyah Nurul Khairiyah, 357 Faridah Hanim Khairuddin, 31 Muhammad Rokhis Khomarudin, 98 Sugeng Krisnanto, 275, 647 Yunike Ayu Kristanti, 167 Jonas Kristanto, 261 Rani Kurnia, 627 Deddy Kurniadi, 357, 659 L Aisyah Diah Larasati, 669 Shu-Hung Lee, 373 Edi Leksono, 109 Lindawati, 647 Yuni Lisafitri, 79 M Alif Al Mahfudz, 22 I G.B.N. Makertihartha, 131 Auditio Mandhany, 109 Maria Utami Manullang, 669 Taufan Marhaendrajana, 627 Hasan Mastrisiswadi, 513 Ahmad Rendi Maulana, 143 Faris Ridwan Maulana, 247 Alan Maulana, 681 Fitriana Meilasari, 153 Noor Aina Misnon, 31 Mochamad Agus Moelyadi, 402 Fathiya Mufidah, 524 Julfikhsan Ahmad Mukhti, 669 Fauzi Zaki Murtadho, 91 Kabiru A. Musa, 569 N Vebi Nadhira, 659 Safri Nahela, 587 Rezky Mahesa Nanda, 109 Nasikhudin, 200 Andri Nasution, 513 Fungki Iqlima Nasyidiyah, 681 Hasbullah Nawir, 275 Shofirul Sholikhatun Nisa, 548 Mays Nofal, 300 Suprihanto Notodarmodjo, 313 Andri Dian Nugraha, 402 Widi Nugraha, 558 Nugraha, 479 Fadjari Lucia Nugroho, 91 Gatot Nugroho, 98 Sebastianus Kristianto Nugroho, 538 Joko Nugroho, 600 Adrian Nur, 548 Dian Asfriany Nurfalah, 627 Sigit Nurhady, 212 Ina Asha Nurjanah, 647 Ahmad Nuruddin, 479 v O Rakotovao Lovanantenaina Omega, 681 Grey Castellar-Ortega, 177 Nurzati Iwani Othman, 40 P Tika Paramitha, 548 Sindi Hajah Patimah, 225 Sidik Permana, 681 Sofia Pinardi, 40 Justin Pradipta, 109 Laras Dipa Pramudita, 275 Jeffry Jaya Pranata, 419 Muhammad Priyatna, 98 Awali Priyono, 402 Agus Purwanto, 548 Suryo Purwono, 261 Dyah Wulandari Putri, 453 Shafira Annisa Putri, 647 R Syarifah Bahiyah Rahayu, 52 Rahmi, 1 Adi Rahwanto, 1 Rajibussalim, 1 Anisa Rarasati, 98 Frafti Rejeki, 681 Wahyu Rismiati, 167 Karisma Rizal, 235 Syamsurizal Rizal, 402 Alireza Roshan, 324 Prasetyo Rubiantoro, 167 S Ulwiyatus Sa’adah, 200 David P. Sahara, 402 Wael A. Salah, 300 Wibawa Hendra Saputera, 419 Dwiwahju Sasongko, 419 Muchamad Arif Hana Sasono, 587 Ravi Sekhar, 340 Haryo Seno, 681 Ni Luh Wulan Septiani, 479 Joni Setiawan, 434 Irwan Setiawan, 659 Ahmad Soleh Setiyawan, 453 Ary Setyawan, 538 Mohd Afizi Mohd Shukran, 52 Utjok W.R Siagian, 627 Indra Djati Sidi, 558 Arif Rahman Hakim Sitepu, 647 Stefanus Barlian Soeryamassoeka, 153 Prayatni Soewondo, 313, 453, 524 Shailesh Sonawane, 340 Wahyu Srigutomo, 681 Made Suarjana, 558 Ramesh T. Subramaniam, 200 Andi Sudiarso, 434 Gandi Sugandi, 357 Dwi Rian Sulaeman, 212 Budi Sulistianto, 247 Rochim Suratman, 393 Muhammad Syukri Surbakti, 1 Yadi Suryadi, 600 Hendri Sutrisno, 153 Wunna Swe, 120 Achmad Syaifudin, 235 T Guesbaya Tahar, 60 Sady A. Tayh, 577 Sukrut Thipse, 340 The Viet Tran, 466 U Ufuoma Joseph Udi, 569 Putu Handre Kertha Utama, 109 V Va Vandith, 453 Chetan Varma, 340 Do Van Vung, 466 W Norshahriah Wahab, 52 Deana Wahyuningrum, 627 Arundhati Warke, 340 Ridho Kresna Wattimena, 247 vi Julian A. Widiatmoko, 384 Pramujo Widiatmoko, 419 Widodo, 225 Sastra Kusuma Wijaya, 98 Prasidya Wikaranadhi, 189 Isananto Winursito, 434 Peter Lloyd Woodfield, 1 Chandra Wulandari, 479 Andojo Wurjanto, 669 Y Chihiro Yoshimura, 453 Rana A. Yousif, 577 Danang Yudistiro, 143 Fajar Yulianto, 98 Brian Yuliarto, 479 Erni Yuniarti, 153 Mohd Sidek Fadhil Mohd Yunus, 52 Elin Yusibani, 1 Nur Izzi Md Yusoff, 31 Yonik Meilawati Yustiani, 91 Z Hamaizia Zahra, 60 M. Rheza Zamani, 225 Basem Abu Zneid, 300 Zulfahmi, 681 Zulfian, 153 Fitri Yuli Zulkifli, 289 Ediansjah Zulkifli, 558 SUBJECT 2 2D materials, 479, 480, 485, 488, 493, 498, 502, 503, 504 3 3D modelling, 153 3D printing, 513 3D scanner, 143, 144, 145 A ABFM, 225, 227 abundance, 167, 168, 169, 170, 171, 172, 173 access control, 52, 53, 54 accident tolerant fuel, 22 acoustic wave, 402, 403, 404, 405, 406, 414 Al-Cu composite, 384, 385, 386, 387, 388, 390 algae, 313, 314, 315, 316, 317, 318, 319, 320, 321, 322 alluvial deposit, 647, 648 aromatics, 131, 132, 134, 135, 136, 137, 138 array antenna, 60, 61, 65, 72, 73, 74 axial compression, 569 B Barito watershed, 98, 99, 100, 101, 102, 103 Batu Layang landfill, 153, 154, 155, 156, 158, 160, 161, 162, 163 benzene, toluene, xylene (BTX), 131, 132, 134, 135, 136, 138, 139, 140 berth structure, 669, 672, 679 bibliometric, 177, 178, 182 bike structure, 12 bimetallic nanoparticles, 177, 178, 181, 184 bioleaching, 79, 80, 81, 82, 83, 84, 85, 86 bioretention, 524, 525, 526, 527, 531, 532, 533, 534, 535, 536 BISAR 3.0, 538, 539, 540, 542, 543, 544, 545, 547 bolt-clamped Langevin transducer, 357, 361 boundary conditions, 569, 570, 571, 572, 573, 576 B-WIM, 558, 559, 560, 562, 563, 565, 567 C carbon capture, 613, 614, 616, 617, 622, 623, 624 cathode material, 548, 549, 551, 554, 555, 556 vii cavitation, 313, 314, 318, 319, 322 CBR, 275, 276, 279, 287 channel state information, 373, 374, 382 characteristic, 167, 171 classification, 587, 588, 589, 591, 592, 593, 594 climate change, 466, 469, 473, 474 coal ash, 79, 80, 83, 84, 85, 86 coal-fired power plant, 212 coconut husk powder, 577, 578 COD removal, 91, 95 coffee, 1, 2, 3, 5, 6, 8, 9, 10 co-firing, 613, 614, 615, 616, 617, 619, 620, 621, 622, 623, 624 combined cycle, 613, 614, 615, 618, 624 concrete hollow block compressive strength, 569 controllable, 300 cooling water system, 212 co-precipitation method, 548, 555 corrosion failure, 639 crash energy management, 235, 238 crashworthiness, 235, 236, 238, 243 CST studio, 60 culvert design, 212, 213 cybersecurity, 52 cycle length, 22, 23, 25, 26, 27, 28, 29, 30 D DAEM, 261, 262, 263, 264, 265, 266, 267, 268, 269, 270, 271, 272, 273 Daubechies wavelet (db6), 120, 121, 123, 124, 126 deceleration pulse, 235, 236, 243, 244, 245 defected ground structure, 289, 290 degree of saturation, 275, 276, 277 density measurement, 659, 666, 667 depressurized, 313 design alternatives, 12 detail coefficient, 120, 121, 123, 127, 128, 129 D-InSAR, 247, 248, 249, 250, 251, 252, 254, 255, 256, 257, 258, 259, 260 discharge channel, 212, 213, 214, 215, 216, 217, 218, 219, 220, 221, 222, 223, 224 double u-slot, 289 drainage system, 600, 602, 605, 607, 608, 612 dynamic corrosion, 639 dynamic shear rheometer test, 324 E E0, 340, 341, 342, 343, 344, 345, 346, 347, 348, 349, 350, 351, 352, 353 E10, 340, 341, 342, 343, 344, 345, 346, 347, 348, 349, 350, 351, 352 eco enzyme concentration, 91, 92, 93, 94 effective electromechanical coupling coefficient, 357 electromagnetic modeling, 225 electromyography, 587, 588, 597 emerging technology, 177 empirical method, 466 energy monitoring, 109 engine performance, 340, 341, 342, 347, 349, 350, 352 Enhanced Dynamic Spectrum Allocation (E-DSA), 40, 42, 43, 44, 45, 46, 47, 48, 49 e-slot, 289 ethanol, 340, 341, 342, 347, 349, 353, 354 experiment, 569 F factor of safety, 647, 648, 652, 653, 654, 655, 656, 657 failure risk assessment, 558 feature extraction, 587, 588, 594, 597 FeCrAl, 22, 23, 27, 28, 29, 30 Filter Bank Multicarrier(FBMC), 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51 finger movement, 587, 588, 594 finite element, 189, 190, 193 finite element analysis, 357, 358, 361, 371 fishing port, 669, 670, 671, 675, 680 viii flexible body, 189 flood hazard mitigation, 225 flood risk, 225 flood, 98, 99, 100, 101, 102, 103, 104, 105 Flores, 1, 2, 4, 7 forward modeling, 402, 405, 408, 412, 413, 414 frame material, 12, 16, 19, 20 freight, 189, 190, 191, 193, 194, 195, 196, 197, 198 freshwater, 167, 168, 170 fused deposition modelling, 513 G Gayo, 1, 2, 4, 5, 8, 9, 10 Gayo Luwak, 1, 2, 4, 5 geoelectric method, 153, 154, 155 graphical password, 52 ground-based radar, 247, 250, 252, 253, 254, 258, 260 H hadfield steel, 393 hamburg wheel-tracking device, 324 heat treatment, 393, 394, 396, 397, 400 heavy metals, 79, 80, 81, 82, 83, 84, 85, 86 HEC-RAS modelling, 212 heterogeneous network, 40, 42 high precision, 300, 311 high-order finite difference, 402, 414 high-speed train, 235, 236, 237, 238 Hough transform, 659, 660, 662 hydraulic retention time, 453, 458, 464 hydrogen, 613, 614, 615, 616, 617, 619, 621, 622, 623, 624 I image clustering, 52, 53, 54, 56, 57, 58 immobilization matrix, 479, 480, 482, 486, 494, 499 indirect tensile strength (ITS), 324, 329, 333, 336 indoor positioning, 373, 374, 382 infiltration well, 600, 601 initial concentration, 453, 455, 456, 458, 459, 463, 464 interfacial tension, 627, 628, 629, 631, 632, 634, 635, 636 K Karrenbauer transformation, 120, 121, 122, 126, 127, 129 KENPAVE, 538, 539, 540, 541, 542, 543, 544, 545 kinetics, 261, 262, 263, 271 Kintamani, 1, 2, 3, 4, 5, 6, 7 KLT-40S, 22, 23, 24, 25, 26, 27, 29, 30 k-means, 52 L land use, 167, 168, 170, 172 landslide monitoring, 466 leachate distribution, 153, 154, 158, 159, 160, 163 leaching, 548, 549, 550, 555 leaky-wave antenna, 289, 290, 293 leaky-wave microstrip antenna, 289, 290, 291, 292, 293, 294, 295, 296, 297, 298 lignocellulosic biomass pyrolysis, 261, 262 limiting current density, 639, 643, 644 live traffic load, 558, 559 load classification, 109, 112 low frequency sampling, 109 M machine learning, 340, 341, 342, 349, 352, 354, 373, 374, 375, 381, 382, 587, 591, 596, 597 machine-learning method, 466 Mamuju, 681, 682, 683, 685, 687 masterplan, 669, 680 MATLAB, 419, 420, 431 medical, 300, 301 membrane, 200, 201, 202, 203, 205, 206, 207, 208 metal injection molding, 143, 144 micro deep drawing, 384, 386, 391 ix micro forming, 384, 385, 389 micro manufacturing, 384 microcontroller, 300, 301, 303 micronized lomashell, 324 microorganism, 79, 83, 84 microplastic, 167, 168, 169, 170, 171, 172, 173, 175, 524, 525, 526, 527, 528, 529, 530, 531, 532, 533, 534, 535, 536 millimeter wave, 60, 61 miniature, 60 modified asphalt, 577, 578, 580, 584, 585 modified septic tank, 453, 454, 463 modifier, 577, 578 moving bed biofilm reactor, 453, 454, 464 multibody simulation, 189, 190, 193, 197 N Nano-Ag, 177 Nano-Au, 177 nanofiber, 200, 201, 202, 203, 204, 205, 206, 207, 208 nanomaterials, 177, 178, 181 nanoparticle/metal, 177, 178, 185 Nash Bargaining Solution (NBS), 40, 43, 49 natural gas, 613, 614, 615, 616, 617, 618, 619, 623, 624 natural radiation, 681, 682, 683, 685 NMC, 548, 549, 551, 552, 554, 556, 557 non-intrusive load monitoring, 109 non-petroleum carbon-based resource, 131 numerical calculation, 261, 262, 263, 270, 271 numerical dispersion, 402, 403, 405, 406, 407, 408, 409, 410, 411, 412, 413, 414 numerical simulation, 12, 13, 14, 16, 17, 18, 19 O occupant protection, 235, 236 office building wastewater, 453, 454, 463, 464 Offset Quadrature Amplitude Modulation (OQAM), 40, 42, 43, 44, 51 openings, 569, 570, 573, 576 optical biosensor, 479 overlay, 538 P P25, 419, 421, 422, 427, 428, 429 PAN/PVDF, 200, 201, 202, 203, 204, 205, 206, 207, 208, 210 permeability, 275, 276, 281, 287 pH, 91, 92, 93, 94, 95, 96, 98 phenol, 419, 420, 421, 422, 423, 424, 425, 426, 427, 428, 429 Photocatalytic, 419, 430, 431, 432, 433 photometric stereo, 659, 660, 661, 662, 666, 667 PHOTOREAC, 419, 420, 421, 422, 423, 424, 425, 428, 429 physical-based method, 466 pixel value, 52, 53, 54, 55, 58 plasticity index, 275, 276, 278, 286 polyurethane, 31 port planning, 669 port productivity, 669 port safety, 669 portable, 300 portable commuter bike, 12, 13 post processing, 513 power plant, 79 precast prestressed concrete girder bridges, 558 printing parameter, 513, 514 probability of failure, 647, 648, 652, 653, 654, 655, 656, 657 proliferation, 22, 23, 27, 29, 30 proportional grid method, 402, 403, 404, 405, 410, 411, 413, 415 R radiation exposure, 681, 682, 683, 685, 686, 687 radiation protection, 681, 682 railway, 189, 190 rainfall, 247, 248, 258 x rainfall-induced landslides, 466, 467, 469, 470, 471, 472, 473, 474 random forest, 373, 374 reactivity coefficient, 22, 23, 25, 26, 29, 30 recycle, 548 Rediset, 31, 32, 34, 35, 36, 37, 38, 39 reliability, 558, 561, 562, 563, 564, 565, 566, 567 removal, 524, 525, 527, 529, 531, 532, 533, 534, 535, 536 repetitive hammering, 393, 394, 396, 397, 398, 400 resistivity, 153, 154, 155, 156, 158, 159, 160, 161, 163 resonance characteristics, 357 rheological properties, 577, 583, 585 river pollution, 91 road, 524, 525, 527, 528, 530 roasted, 1, 3, 4, 5, 8, 10 rock mass, 247, 248, 250, 251, 252, 260 rotational viscosity, 577, 578, 584 RSSI, 373, 374, 380, 381, 382, 383 rubberized asphalt, 538, 539 runoff control, 600, 612 S SCALE, 22, 23, 25, 26, 27, 30 scanning electron microscopy(SEM), 324, 327, 328, 330, 335, 336, 338 scientometric, 177, 178, 186 sedimentation, 225, 230 sensitivity enhancement, 479, 480, 486, 493, 498, 499 sensor, 300, 303 Sentinel-1, 98, 99, 102, 104, 105, 107 separator, 200, 202, 204, 205, 206, 207, 208 service life, 538, 539, 540, 544, 545, 546 Sherwood number, 639, 644 shot peening, 513, 514, 516, 518, 519, 521 sintering, 143, 144, 145, 146, 147, 149, 151 slots, 60 smart, 300, 311 Sn, 143, 144, 145, 146, 147, 149, 150, 151, 152 soil compaction, 275, 276, 286, 287 solid-state method, 548, 549 solution annealing, 393, 394, 396, 397, 398 spent catalyst, 548, 549, 550, 554, 555 springback, 384, 385, 386, 388, 389, 390 standard penetration test, 647, 648 static corrosion, 639 statistical sampling, 98, 105 Steel 37, 639, 640, 641, 642, 643, 644 storage ponds, 600, 601 stormwater, 600, 601, 607 stormwater runoff, 524, 525, 526, 527, 528, 529, 530, 531, 534, 536 strain hardening, 393, 394 supercapacitor, 200, 201, 202, 206, 207 support vector machine, 109, 110, 117 surface plasmon resonance, 479, 514 surfactant, 627, 628, 629, 630, 631, 632, 633, 634, 635 surfactant mixture, 627, 629 synthetic river water, 91, 92, 93, 94, 95, 96 syringe pump, 300, 301, 303, 304, 306, 310, 311 T Taguchi, 143, 145, 146, 147, 151, 152 Taylor series, 402, 404 TDEM, 225, 226, 227, 228, 229, 230, 231, 233, 234 TGA, 261, 272, 273 thermal behavior, 31, 37 threshold, 98, 99, 100, 101, 102, 103, 104, 105 times, 373 TiO2, 419, 420, 421, 422, 423, 426, 427, 428, 429, 430, 431, 432, 433 topography, 31, 32, 33, 35, 36 Toraja, 1, 2, 3, 4, 7 traveling wave theory, 120, 121 tropical soil, 275, 276, 278, 286 xi U U3Si2, 22, 23, 27, 29, 30 ultrasonication, 313, 314, 315, 318, 319, 320, 321, 322, 357 ultra-wide band, 60 V variability of shear strength, 647, 648, 656 vegetation, 524, 525, 532, 533, 534, 535, 536 W Wamena, 1, 2, 3, 4, 7 warm mix asphalt, 31 warp density, 659, 663 waste treatment, 313, 419 wavelet transform, 120, 121, 122, 124, 129 waxy oil, 627, 628, 635 weft density, 659, 660, 663, 666, 667 woven fabric, 659, 661, 662, 663, 664, 665, 666, 667 Y Young’s modulus, 247, 251, 252, 253, 254, 256, 257, 258, 259, 260 Z zeolite, 131, 132, 134, 135, 136, 137, 138, 139 xii List of Reviewers 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. Muhannad Kaml Abdulhameed (Information Technology Department, University of Kerbala, Karbala, Iraq) Huda Binti Abdullah (Department of Electrical, Electronic and Systems Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, Selangor, Malaysia) Muhammad Sonny Abfertiawan (Water & Wastewater Engineering Research Group, Faculty of Civil and Environmental Engineering, Institut Teknologi Bandung, Indonesia) Lawal Lanre Adebayo (Fundamental Applied Science Department, Universiti Teknologi Petronas, Malaysia) Vincentius Surya Kurnia Adi (Department of Chemical Engineering, National Chung Hsing University, Taichung, 40227, Taiwan) Agustan (Research Center for Geospatial, National Research and Innovation Agency (BRIN), Jakarta, Indonesia) Hijaz Ahmad (Operational Research Center in Healthcare, Near East University, TRNC Mersin 10, Nicosia, 99138, Turkey) Mahmoud A.M. Albreem (Department of Electrical Engineering, University of Sharjah, Sharjah, United Arab Emirates) Mohammad Alibakhshikenari ( Department of Signal Theory and Communications, Universidad Carlos III de Madrid, Madrid, Spain) Mohd Aliff (Quality Engineering Research Cluster (QEREC), Universiti Kuala Lumpur, Johor, Malaysia) Angelo Aloisio ( Department of Civil, Construction-Architectural and Environmental Engineering, Università degli Studi dell'Aquila, L'Aquila, Italy) Ibrahim M.H. Alshaikh (School of Civil Engineering, Universiti Sains Malaysia, Penang, Nibong Tebal, 14300, Malaysia) Aytaç Altan (Department of Electrical Electronics Engineering, Zonguldak Bülent Ecevit University, Zonguldak, Turkey) Nuri Andarwulan (Department of Food Science and Technology, Faculty of Agricultural Engineering and Technology, Bogor Agricultural University, IPB Dramaga, Bogor, Indonesia) Nur Afny Catur Andryani (Department of Electrical Engineering, Universitas Indonesia) Alejandro Valencia-Arias (American University Corporation, Colombia) I Nyoman Arya Thanaya (Civil Engineering Department, Udayana University, Bali, Indonesia) Muhammad Khusairy Bin Bakri (Faculty of Engineering, Universiti Malaysia Sarawak, Sarawak, Malaysia) Ahmad Hoirul Basori (Faculty of Computing and Information Technology Rabigh, King Abdulaziz University, Rabigh, Makkah, Saudi Arabia) Ruijie Bian (Louisiana Transportation Research Center, Louisiana State University, United States) Nurmin Bolong (University Malaysia Sabah, Faculty of Engineering, Kota Kinabalu, Malaysia) Marco Bonopera (Department of Civil Engineering, College of Engineering, National Taiwan University) Luqman Buchori (Department of Chemical Engineering, Diponegoro University, Semarang, Indonesia) xiii 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. 42. 43. 44. 45. 46. Tapos Kumar Chakraborty (Department of Environmental Science and Technology, Faculty of Applied Science and Technology, Jashore University of Science and Technology, Jashore, Bangladesh) Somchart Chantasiriwan (Faculty of Engineering, Thammasat School of Engineering, Thammasat University, Pathum Thani, Thailand) Wei Bo Chen (National Science and Technology Center for Disaster Reduction, New Taipei City, Taiwan) Chart Chiemchaisri (Department of Environmental Engineering, Faculty of Engineering, Kasetsart University, Thailand) Raf Dewil (KU Leuven, Department of Chemical Engineering, Process and Environmental Technology Lab, Belgium) Dimas Bayu Endrayana Dharmowijoyo (Department of Civil Engineering, University of Technology Petronas, Malaysia) Roberto Diversi (Department of Electronics, Computer Science and Systems, University of Bologna, Italy) Wenkui Dong (Institute of Construction Materials, TU Dresden, Germany) Abdelhakim Dorbane (Smart Structures Laboratory (SSL), Department of Mechanical Engineering, Faculty of Science and Technology, University of Ain Temouchent, Algeria) Sumayyah Dzulkifly (Computing Department, Faculty of Art, Computing and Creative Industry (FSKIK), Sultan Idris Education University, Malaysia) Alessio Fascista (University of Salento, Department of Innovation Engineering, Lecce, Italy) Ellie H. Fini (Arizona State University, 660 S. College Avenue, Tempe, AZ, United States) Masoud Forsat (Department of Mechanical and Industrial Engineering, Qatar University, Doha, Qatar) Denis Frolov (Lomonosov Moscow State University, GSP-1, Leninskie Gory, Moscow, Russian Federation) L. Gao (State Key Lab of Digital Manufacturing Equipment and Technology, School of Mechanical Science and Engineering, Huazhong University of Science and Technology, China) Femiana Gapsari (Department of Mechanical Engineering, Faculty of Engineering, Brawijaya University, Indonesia) Guillermo Iván Guerrero-García ( Facultad de Ciencias de la Universidad Autónoma de San Luis Potosí, , Mexico) Amir Hossein Ghasemi (Department of Mechanical Engineering, Shahid Rajaee Teacher Training University, Tehran, Iran) Nguyen Thanh Giao (College of Environment and Natural Resources, Can Tho University, Vietnam) Adam Głowacz ( AGH University of Science and Technology, Faculty of Electrical Engineering, Automatics, Computer Science and Biomedical Engineering, Department of Automatic Control and Robotics, Poland) Djoko Mulyo Hartono (Civil Engineering Department, Universitas Indonesia, Indonesia) Mohd Rosli Mohd Hasan (School of Civil Engineering, Universiti Sains Malaysia, Penang, Malaysia) Alsidqi S.M.Z. Hasan (Department of Civil Engineering, Faculty of Engineering, Universiti Malaysia Sarawak, Malaysia) xiv 47. 48. 49. 50. 51. 52. 53. 54. 55. 56. 57. 58. 59. 60. 61. 62. 63. 64. 65. 66. 67. 68. 69. 70. 71. Aisha Hassan Abdalla Hashim (Department of Electrical and Computer Engineering, International Islamic University Malaysia) Hossein Hatami (Department of Mechanical Engineering, Lorestan University, Khorramabad, Iran) Qomarudin Helmy (Environmental Engineering Department, Faculty of Civil & Environmental Engineering, Institut Teknologi Bandung, Indonesia) Nurul F. Himma (Department of Chemical Engineering, Universitas Brawijaya, Indonesia) Olivier A.C. Hoes (Department of Water Management, TU Delft, Delft, Netherlands) Chungching Huang (National Kaohsiung University of Science and Technology, Department of Mold and Die Engineering, Kaohsiung, Taiwan) Novana Hutasoit (School of Engineering, Swinburne University of Technology, Australia) Yeong Maw Hwang (Department of Mechanical and Electro-Mechanical Engineering, National Sun Yat-Sen University, Taiwan) Iswandi Imran (Structural Engineering Research Group, Faculty of Civil and Environmental Engineering, Institut Teknologi Bandung, Indonesia) Antonius Indarto (Department of Bioenergy Engineering and Chemurgy, Institut Teknologi Bandung, Indonesia) Emma Ortíz-Islas (Nanotechnology Laboratory, Instituto Nacional de Neurología y Neurocirugía (INNN), Mexico City, Mexico) Bahram Jafari (Faculty of Engineering Modern Technologies, Amol University of Special Modern Technologies (AUSMT), Amol, Iran) Zhenzhen Jin (College of Mechanical Engineering, Guangxi University, Nanning, China) Grandprix Thomryes Marth Kadja (Division of Inorganic and Physical Chemistry, Institut Teknologi Bandung, Indonesia) Iradiratu Diah Prahmana Karyatanti (Department of Electrical Engineering, Faculty of Engineering and Marine Science, Hang Tuah University, Surabaya, Indonesia) Izuru Kawamura (Graduate School of Engineering, Yokohama National University, Yokohama, , Japan) Faridah Hanim Khairuddin (Department of Civil Engineering, Faculty of Engineering, National Defense University of Malaysia, Malaysia) Gandjar Kiswanto (Mechanical Engineering Department, Universitas Indonesia, Depok, Indonesia) Takashi Kiyota (Institute of Industrial Science, University of Tokyo, Japan) Irwan Kurnia (Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran, Sumedang, Indonesia) Rendi Kurniawan (School of Mechanical Engineering, Yeungnam University, Gyeongsan-si, 712749, South Korea) Minh-Vien Le (Faculty of Chemical Engineering, Ho Chi Minh City University of Technology (HCMUT), Ho Chi Minh City, Viet Nam) Polina Lemenkova (École Polytechnique de Bruxelles, Brussels Faculty of Engineering, Université Libre de Bruxelles (ULB), Brussels, Belgium) Weijie Li (School of Civil Engineering, Dalian University of Technology, Dalian, China) Aswin Lim (Department of Civil Engineering, Universitas Katolik Parahyangan, Bandung, Indonesia) xv 72. 73. 74. 75. 76. 77. 78. 79. 80. 81. 82. 83. 84. 85. 86. 87. 88. 89. 90. 91. 92. 93. 94. Yuxiao Lin ( School of Physics and Electronic Engineering, Jiangsu Normal University, China) Giulio Mangano (Dept. of Management and Production Engineering – Politecnico di Torino, Turin, Italy) Mahmoud Mani (Aerospace Department, Amirkabir University of Technology (Tehran Polytechnic), Tehran, Iran) Marina Marinelli (School of Engineering, University of Leicester, Leicester, United Kingdom) Holman Ospina-Mateus (Department of Industrial Engineering, Universidad Tecnológica de Bolívar, Cartagena, Colombia) Daisuke Matsui (Department of Biotechnology, College of Life Sciences, Ritsumeikan University, Shiga, Japan) Małgorzata Matusiak ( Institute of Textile Architecture, Lodz University of Technology, Poland) Azza M. Mazrouaa (Petrochemical Department, Egyptian Petroleum Research Institute, Cairo, Egypt) Sharifuddin Mondal (Department of Mechanical Engineering, National Institute of Technology Patna (Bihar), India) Prolay Mondal (Department of Geography, Raiganj University, West Bengal, Raiganj, India) César Augusto Moreira ( Geology Department, Geosciences and Exact Sciences Institute (IGCE), São Paulo State University (UNESP), São Paulo, Brazil) Anastasia Moumtzidou ( Information Technologies Institute/Centre for Research and Technology Hellas, Thessaloniki, Greece) N. Murugu Nachippan (Department of Automobile Engineering, Vel Tech Rangarajan Dr, Sagunthala R&D Institute of Science and Technology, Chennai, India) Ahmad Nawaz (Department of Chemical Engineering & Technology, Indian Institute of Technology (BHU), India) Vladimir N. Nesterov (Division of Nuclear-Fuel cycle, School of Nuclear Science & Engineering, National Research Tomsk Polytechnic University, Tomsk, Russian Federation) Masoud Salavati-Niasari (Institute of Nano Science and Nano Technology, University of Kashan, Kashan, Iran) Eka Djatnika Nugraha (Research Center for Safety, Metrology, and Nuclear Technology, The National Research and Innovation Agency of Indonesia (BRIN), Indonesia) Igor B. Okipnyi (Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine) Say Leong Ong (Department of Civil and Environmental Engineering, National University of Singapore, Singapore) Budianto Ontowirjo (Civil Engineering Department, Bakrie University, Jakarta, Indonesia) Balasundar P (Department of Mechatronics Engineering, Kamaraj College of Engineering and Technology, Madurai, India) Afnimar (Geophysical Engineering Study Program, Institut Teknologi Bandung, Indonesia) Srinivasa P. Pai (Department of Mechanical Engineering, NMAM Institute of Technology, Nitte, India) xvi 95. Moslem Paidar (Department of Materials Engineering, Islamic Azad University, South Tehran Branch, Tehran, Iran) 96. Pinaki Pal (Energy Systems Division, Argonne National Laboratory, IL, United States) 97. Pyae Pyae Phyo ( Department of Electrical Engineering, Eindhoven University of Technology, Netherlands) 98. Ekavianty Prajatelistia (Materials Science and Engineering Department, Institut Teknologi Bandung, Indonesia) 99. Widjojo Adi Prakoso (Civil Engineering Department, Universitas Indonesia, Indonesia) 100. Vania Mitha Pratiwi (Department of Chemical Engineering, Politeknik Negeri Malang, Indonesia) 101. Eko Pujiyanto (Industrial Engineering Department, Faculty of Engineering, Sebelas Maret University, Surakarta, Indonesia) 102. Faizan Qamar (Faculty of Information Science and Technology, Universiti Kebangsaan Malaysia (UKM), Malaysia) 103. Aminu Darda'u Rafindadi (Department of Civil & Environmental Engineering, Universiti Teknologi Petronas, Malaysia) 104. Rahimi A. Rahman (Faculty of Civil Engineering Technology, Universiti Malaysia Pahang, Malaysia) 105. Fety Ilma Rahmillah (Centre for Accident Research and Road Safety-Queensland (CARRS-Q), Queensland University of Technology (QUT), Brisbane, Australia) 106. S. Ramesh (Department of Electronics and Communication Engineering, Srm Valliammai Engineering College, India) 107. Erza Rismantojo (Geotechnical Engineering Research Group, Faculty of Civil and Environmental Engineering, Institut Teknologi Bandung, Indonesia) 108. Jenny Rizkiana (Department of Chemical Engineering, Institut Teknologi Bandung, Indonesia) 109. Asep Saepuloh (Faculty of Earth Sciences and Technology, Institut Teknologi Bandung, Indonesia) 110. Andhika Sahadewa (Faculty of Civil and Environmental Engineering, Institut Teknologi Bandung, Indonesia) 111. Anshuman Kumar Sahu (Department of Mechanical Engineering, National Institute of Technology, India) 112. Katsuhiko Sasaki (Division of Human Mechanical Systems and Design, Faculty of Engineering, Hokkaido University, Sapporo, Japan) 113. Krishna Prasad Satamraju (Vasireddy Venkatadri Institute of Technology, Department of Computer Science and Engineering (IoT), India) 114. Alfrendo Satyanaga (Department of Civil and Environmental Engineering, Nazarbayev University, Kazakhstan) 115. Bhupendra Prakash Sharma (Department of Mechanical Engineering, Amity University, Noida, Uttar Pradesh, India) 116. Jinyan Shi (School of Civil Engineering, Central South University, Changsha, China) 117. Hasbi Ash Shiddiqi (Department of Earth Science, University of Bergen, Norway) 118. Dian Shofinita (Department of Food Engineering, Faculty of Industrial Technology, Institut Teknologi Bandung, Indonesia) 119. Januar Parlaungan Siregar ( College of Engineering, Universiti Malaysia Pahang, Malaysia) xvii 120. Guohui Song (School of Energy and Power Engineering, Nanjing Institute of Technology, China) 121. Pepen Supendi (Department of Earth Sciences – Bullard Labs, University of Cambridge, Cambridge, United Kingdom) 122. Bambang Supriyo (Department of Electrical Engineering, Politeknik Negeri Semarang, Indonesia) 123. Nawatch Surinkul (Department of Civil and Environmental Engineering, Faculty of Engineering, Mahidol University, Thailand) 124. Reni Suryanita (Department of Civil Engineering, Riau University, Riau, Pekanbaru, Indonesia) 125. Rusmawan Suwarman (Atmospheric Science Research Group, Faculty of Earth Science andTechnology, Bandung Institute of Technology, Bandung, Indonesia) 126. Syafiie Syafiie (Department of Chemical and Materials Engineering, Faculty of Engineering-Rabigh, King AbdulAziz University, Saudi Arabia) 127. Achmad Syaifudin (Department of Mechanical Engineering, Institut Teknologi Sepuluh Nopember, Indonesia) 128. Mastura Mohammad Taha (Fakulti Teknologi Kejuruteraan Mekanikal dan Pembuatan, Universiti Teknikal Malaysia Melaka,Malaysia) 129. Bahman Taheri (Electrical & Computer Engineering Faculty, Semnan University, Semnan, Iran) 130. Muhammad Tahir (Civil Engineering Department, University of Engineering and Technology, Taxila, Pakistan) 131. Sofyan A. Taya (Physics Department, Islamic University of Gaza,Palestine) 132. Mehmet Tontu (Mechanical Engineering Department, Cukurova University, Adana, Turkey) 133. Farid Triawan (Department of Transdisciplinary Science and Engineering, Tokyo Institute of Technology, Japan) 134. P. Umamaheswarrao (Department of Mechanical Engineering, Bapatla Engineering College, India) 135. A. Usman (Department of Chemistry, Faculty of Science, Universiti Brunei Darussalam, Jalan Tungku Link, Gadong, Brunei Darussalam) 136. I. K.A.P. Utama (Department of Physics Engineering, Institute of Technology Sepuluh Nopember, Surabaya, Indonesia) 137. Joko Waluyo (Chemical Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Surakarta, Indonesia) 138. Andreas Wibowo ( Department of Civil Engineering, Center of Excellence in Urban Infrastructure Development, Parahyangan Catholic University, Bandung, Indonesia) 139. Satrio Wicaksono (Faculty of Mechanical and Aerospace Engineering, Institut Teknologi Bandung, Indonesia) 140. Pramujo Widiatmoko (Research Group on Energy and Chemical Engineering Processing System, Department of Chemical Engineering, Institut Teknologi Bandung, Indonesia) 141. Yoke Seng Wong (School of Computing and Creative Media, KDU University College, Glenmarie, Shah Alam, Malaysia) 142. Sicong Xiao (Singapore Nuclear Research and Safety Initiative, National University of Singapore, Singapore) 143. Shoune Xiao (State Key Laboratory of Traction Power, Southwest Jiaotong University, Chengdu, China) xviii 144. Tianhua Xu (School of Engineering, University of Warwick, Coventry, United Kingdom) 145. Chengxing Yang ( Key Laboratory of Traffic Safety on Track, Central South University, China) 146. Brian Yuliarto (Advanced Functional Material Research Group, Faculty of Industrial Technology, Institut Teknologi Bandung, Indonesia) 147. Ping Zhou (Qualcomm, Inc., San Diego, United State) Journal of Engineering and Technological Sciences Guidelines for Author 1. Standard of reporting Authors should present an accurate account of the work performed as well as an objective discussion of its significance. Underlying data should be represented accurately in the paper. A paper should contain sufficient detail and references to permit others to replicate the work. Fraudulent or knowingly inaccurate statements constitute unethical behavior are unacceptable. Professional publication articles should also be accurate and objective, and editorial ‘opinion’ works should be clearly identified. 2. Exclusivity of work The authors should ensure that they have written entirely original works, and if the authors have used the work and/or words of others this should be appropriately cited or quoted. Plagiarism takes many forms, from ‘passing off’ another’s paper as the author’s own paper to copying or paraphrasing substantial parts of another’s paper (without attribution), to claiming results from research conducted by others. Plagiarism in all its forms constitutes unethical publishing behavior and is unacceptable. An author should not in general publish manuscripts describing essentially the same research in more than one journal or primary publication. Submitting the same manuscript to more than one journal concurrently constitutes unethical publishing behaviour and is unacceptable. In general, an author should not submit for consideration in another journal a previously published paper. We consider for publication from conference paper if it is only an extended version of conference paper with at least 30% of new material. 3. Hazards and Human or Animal Subjects If the work involves chemicals, procedures or equipment that have any unusual hazards inherent in their use, the author must clearly identify these in the manuscript. If the work involves the use of animal or human subjects, the author should ensure that the manuscript contains a statement that all procedures were performed in compliance with relevant laws and institutional guidelines and that the appropriate institutional committee(s) has approved them. Authors should include a statement in the manuscript that the informed consent was obtained for experimentation with human subjects. The privacy rights of human subjects must always be observed. 4. Authorship of the Paper and Copyright Authorship should be limited to those who have made a significant contribution to the conception, design, execution, or interpretation of the reported work. All those who have made significant contributions should be listed as co-authors. Whilst those who have participated in certain substantive aspects of the research project, they should be acknowledged or listed as contributors. The corresponding author should ensure that all appropriate and inappropriate co-authors are included on the paper, and that all co-authors have seen and approved the final version of the paper and have agreed to its submission for publication. No manuscript can be published unless accompanied by a signed publication agreement, which serves as a transfer of copyright from author to publisher. A copy of that agreement is required after the paper is accepted. 5. Acknowledgement Proper acknowledgment of the work of others must always be given. Authors should cite publications that have been influential in determining the nature of the reported work. Information obtained privately, as in conversation, correspondence or discussion with third parties, must not be used or reported without explicit, written permission from the source. Information obtained in the course of confidential services, such as refereeing manuscripts or grant applications, must not be used without the explicit written permission of the author of the work involved in these services. 6. Disclosure Requirements Author when submitting a manuscript, must disclose any meaningful affiliation or involvement, either direct or indirect, with any organization or entity with a direct financial interest in the subject matter or materials discussed (for example, employment, consultancies, stock ownership, grants, patents received or pending, royalties, honoraria, expert testimony). These kinds of financial involvement are fairly common, unavoidable, and generally do not constitute a basis for rejecting a manuscript. Specifics of the disclosure will remain confidential. If deemed appropriate by the Scientific Editor, a general statement regarding disclosure will be included in the Acknowledgment section of the manuscript. 7. Errors in Published Works When an author discovers a significant error or inaccuracy in his/her own published work, it is the author’s obligation to promptly notify the journal editor or publisher and cooperate with the editor to retract or correct the paper. If the editor or the publisher learns from a third party that a published work contains a significant error, it is the obligation of the author to promptly retract or correct the paper or provide evidence to the editor of the correctness of the original paper. 8. Disclaimer Opinions expressed in articles published in the Journal of Engineering and Technological Sciences are those of the author(s) and do not necessarily represent opinions of the Bandung Institute of Technology (ITB). The Journal of Engineering and Technological Sciences does not guarantee the appropriateness for any purpose of any method, product, process, or device described or identified in an article. Trade names, when used, are only for identification and do not constitute endorsement by Journal of Engineering and Technological Sciences. 9. Manuscript preparation Use the English language and the SI system (Système International d'Unités, often referred as "International Units") for measurements and units. Manuscript in MS Word or PDF format (generated from MS Word) is to be submitted online through http://journals.itb.ac.id/index.php/jets. The length of manuscript is expected not to exceed 20 printed pages (single space) including abstract, figures, tables and references. An abstract between 100 and 200 words describes the significance of manuscript should be included. The authors should supply 5-10 keyword or phrases that characterizes their manuscript. Use 11 pt Times New Roman fonts for body of the text with 1.0 line spacing between lines. The references should be numbered consecutively in the order of their appearance and should be complete, including authors’ initials, the title of the paper, the date, page numbers, and the name of the sponsoring society. Please compiles references as shown in the examples below. Figures are printed in black & white, while color figures are only available online. Adjust the size of figures and tables as they will be appeared. All figure captions should be legible, minimum 8 point type. For all equations, use either Microsoft Equation Editor or MathType add-on. Equations are numbered consecutively in parenthesis, e.g. (1), and set at the right margin. Reference examples: [1] Sutasurya, L.A. & Riyanto, B., Title of Paper, Name of Journal, 8(1), pp. 20-25, Dec. 2005. (Journal) [2] Sutasurya, L.A., Handojo, A. & Riyanto, B., Title of book, ed. 2, Publisher, 2007. (Book) [3] Williams, J., Name of Paper, Name of Book, Name of the editor(s), eds., Publisher, pp. 67-69, 2006. (Book with paper title and editor) [4] Suharto (ed), Title of Paper, Name of Proc., pp. 5-10, 2008. (Conference Proceedings) [5] Name of the author(s), Title of paper (if available), Organization, URL Link, (1 April 2011). (URL Link) [6] Nicole, R., Title of Paper, Name of Journal, submitted for publication. (Pending publication) [7] John, K., Title of Paper, unpublished. (Unpublished manuscript) [8] Rashid, L., Title of Dissertation, PhD dissertation, Name of Dept., Name of Univ., City, 2010. (Thesis or Dissertation) [9] Jenny, P., Name of Institution, City, personal communication, 2010. (Personal communication) [10] Name of the author(s), Title of Technical Report, Technical Report TR-0334 (34-56), Name of Institution, City, Dec. 2009. (Technical report with report number) [11] Name of the author(s), Title of Paper in English, Name of Journal, 8(4), pp. 20-25, 2010. (Text in Indonesian and Abstract in English) (Use this if the references in other language than English).